logo van vinfoil

Company

Product

logo van vinfoil
back to all large formats

optima sf165mf

  • 16.000 Sheets P/H
  • Including Balancer
  • Including ALUS++
get in contact
in general

Our largest cold transfer module...

With all the benefits of its smaller brothers, and more..

With the Optima SF165MF we offer a complete product portfolio. No matter what format you run, we are convinced we have a solution that will fit.  Take a look at all the unique options of our largest cold transfer solution below.

4-lijm4-lijm+f
Optima SF165MF

see the Features

Automatic Loading and Unloading System (ALUS++)

By making the ALUS easy to operate and making it possible to load and unload two locking shafts (unwinding and rewinding) at the same time, the changeover times are reduced to a minimum. Since the ALUS is integrated into the cold transfer module, there is a clear communication process between the module and the ALUS, so safety is ensured. Based on the project, the length and height of the ALUS can be modified to create a perfect fit for every location.

Direct foil drives (DFD)

Your customer requires their job to be ready fast. With the Direct Foil Drive (DFD) technology, we guarantee flawless high-quality printing results at maximum speeds of 20.000 sheets per hour. depending on the module

Foil shaft changer

Job preparation before or during production, saving change over times Changing the reels takes place at ground level Integrated touchscreen Pre-set VIFOP data ensuring easy and fase positioning of the reels

Foil Unit (FU)

With the FU, one or more foil reels can be used at the same time (Multi-reel). It has automatic diameter detection for perfect speed synchronization with the press. The foil is unwound and rewound. And the rest roll diameter can be adjusted, depending on the thickness of the foil core.

Multiple Foil Use (MFU)

By guiding the foil web back into the printing nip (after transferring parts of the metallic layer for the first time) a foil web can be used up to three times during the same job and foil savings up to 85% can be reached. (Compared to full web and laminated board, depending on the job.) If you choose to invest in the Venusta SF110MF standard version please note we offer one MFU deck, allowing you to reach foil savings up to 50%
frequently asked questions

frequently asked Questions

Using a standard offset plate, an image is printed onto a substrate by the use of a tacky adhesive. Foil spools from an unwind and is nipped to a substrate. The aluminium particles from the cold foil layer are released from the polyester film and transferred to the substrate by the tack of the glue.
An image with a bright surface is created on the sheet. Foil that does not adhere to the adhesive remains on the 12um film, and waste is directed to a rewind spool or to a shredder (Vinfoil Infigo systems).

Because the adhesive is applied like a conventional ink, no expensive stamping die has to be created. Once printed, the surface of cold foil images may be overprinted and varnished.
  • Enables full-surface sheet decoration at high speeds
  • High-speed applications up to 20,000 sheets per hour overprinting can be done inline and offline
  • Eliminates the need for engraved hot stamping dies
  • Allows use of standard offset printing plates, rollers, washing agents, rubber blankets for applying the adhesive
  • Using multiple parallel-running, narrow foil rolls, the foil consumption can be minimized and made more economical
  • Job changeovers, with or without foil, can be performed in just minutes
  • No need to apply opaque white – the foil is simply omitted in the relevant areas
  • Outstanding flatness of the output – optimal further processing
  • Speed-to-market potential – very short production times
  • Ideal for small print runs and frequent job changeovers

Multiple Foil Use (MFU) is Vinfoil’s patented foil saving technology.

By guiding the foil web back into the printing nip (after transferring parts of the metallic layer for the first time) a foil web can be used up to 3 times during the same job and foil savings up to 85% can be reached. (Compared to full web and laminated board, depending on the job.)

 

More Formats

enjoy more of our solutions

Interested in other solutions we have to offer? Check them below or take a look at the other options in our portfolio!

1. Optima SF145MF

learn more

get in contact

Let us be your guide into the cold transfer world. Contact us for more information today!

contact
view all categories

enjoy more of our portfolio

Designing a Vinfoil cold transfer solution requires our team of experts to always listen to and understand the needs of our customers and the market. Every feature of Vinfoil’s unique cold transfer technology has been created with this thought in mind.
"We were looking for a partner that was able to make it possible to offer our products against the best pricing, increase our internal efficiency, and reduce our changeover times. It quickly became clear Vinfoil was the perfect option for us."
Mr. Stëphane Boisson

Plant Manager - TPG Pack, France

Get your Foil saving calculation

Vinfoil's Intelligent Foil

Optimizing Program
Start now
logo van vinfoil
Youtube Linkedin

Company

Product

vinfoil