portfolio web fed

web fed format

Our Most Complete module…

With the Multiple Foil Use technology (MFU), Websplitting feature and changeover times of a minute all combined into one solution, our Infigo series is the most complete cold transfer solution in the industry. 

types of machines

web fed format

Check out all the details of this unique cold transfer solution below

get in contact

Let us be your guide into the cold transfer world. Contact us for more information today!

frequently asked questions

frequently asked questions

Using a standard offset plate, an image is printed onto a substrate by the use of a tacky adhesive. Foil spools from an unwind and is nipped to a substrate. The aluminium particles from the cold foil layer are released from the polyester film and transferred to the substrate by the tack of the glue.
An image with a bright surface is created on the sheet. Foil that does not adhere to the adhesive remains on the 12um film, and waste is directed to a rewind spool or to a shredder (Vinfoil Infigo systems).

Because the adhesive is applied like a conventional ink, no expensive stamping die has to be created. Once printed, the surface of cold foil images may be overprinted and varnished.
  • Enables full-surface sheet decoration at high speeds
  • High-speed applications up to 20,000 sheets per hour overprinting can be done inline and offline
  • Eliminates the need for engraved hot stamping dies
  • Allows use of standard offset printing plates, rollers, washing agents, rubber blankets for applying the adhesive
  • Using multiple parallel-running, narrow foil rolls, the foil consumption can be minimized and made more economical
  • Job changeovers, with or without foil, can be performed in just minutes
  • No need to apply opaque white – the foil is simply omitted in the relevant areas
  • Outstanding flatness of the output – optimal further processing
  • Speed-to-market potential – very short production times
  • Ideal for small print runs and frequent job changeovers

Multiple Foil Use (MFU) is Vinfoil’s patented foil saving technology.

By guiding the foil web back into the printing nip (after transferring parts of the metallic layer for the first time) a foil web can be used up to 3 times during the same job and foil savings up to 85% can be reached. (Compared to full web and laminated board, depending on the job.)


"The Vinfoil Optima® SF110 GF allows us the biggest optimization of foil saving and it is a modern solution offering quick reel change over. We also have made a research before our final decision. In the opinion of current users the Vinfoil service showed a very good competence which was one of the key points for our choice."
Mr. Zbigniew Pieczonka

Owner - Karton-Pak Cieszyn, Poland

Get your Foil saving calculation

Vinfoil's Intelligent Foil

Optimizing Program